1
00:00:11,000 --> 00:00:18,360
Hello friends, good afternoon and we are ready again for today's class,

2
00:00:18,700 --> 00:00:25,380
very good afternoon to all of you and we are starting with the class so that all of you mentioned

3
00:00:25,380 --> 00:00:37,960
Its time, let's review a 4K television here we have it, this is a 4K television from the brand

4
00:00:37,960 --> 00:00:47,680
I'm going, ok mark I'm going, this panel has 12, it has 12, here we have 1 central one, as you can see,

5
00:00:47,980 --> 00:00:55,060
that has nothing at its ends, they realize, there is nothing and we are going to go to the cop at the last cop,

6
00:00:55,660 --> 00:01:03,400
where, as you will realize, the situation is already changing because here we already have clues,

7
00:01:03,950 --> 00:01:11,300
There are the clues, here we have different clues that tell us that here

8
00:01:11,300 --> 00:01:18,720
They pass the signals for vertical control, here we can see them correctly, here we have them,

9
00:01:19,260 --> 00:01:33,280
All these signals are then our signals to be able to work, here the cop tells us,

10
00:01:33,280 --> 00:01:41,700
look at x of 1, which means x driver 1, remember that here you can call x,

11
00:01:42,340 --> 00:01:51,300
Remember that I told you that these can be called x we have 1 and this one has 12, here we are going to have the second,

12
00:01:51,920 --> 00:02:01,220
If you will call x of 2, here we have it, x of 2, we have an x of 3, here is x of 3,

13
00:02:01,860 --> 00:02:14,260
an x of 4, here we have it, x of 4, x of 5, here we have it, x of 5,

14
00:02:15,660 --> 00:02:21,280
x of 6, which is where it will end,

15
00:02:22,600 --> 00:02:28,720
Here is the first part of our bread, whether I am a slave or whether I am a master,

16
00:02:28,720 --> 00:02:35,960
but I had told them that we are going to make a diagram, or that in this part we are going to do it in a way

17
00:02:35,960 --> 00:02:44,160
quick simple, because in many points they are well marked, but that is why I tell you that you have to do it

18
00:02:45,480 --> 00:02:51,040
In this way, observe, here we have the cop that I was with you at the time,

19
00:02:51,040 --> 00:02:59,320
What is this, the second, here is my, here we have a peculiarity, because this cop comes to me because

20
00:02:59,320 --> 00:03:05,020
the others are not marked, you will realize that in some cops it may be marked and in others,

21
00:03:05,020 --> 00:03:25,440
here in this case all these are range levels, mi, j7, j5, j3, j11, j6, j8, j4, j2, j8, j6, j4, j2, j8, j6, j4, j2,

22
00:03:25,440 --> 00:03:37,740
All of these are gamma, or that all of these are gamma, there we have gamma, which would leave us with looking for where it is

23
00:03:37,740 --> 00:03:45,100
go with where it is, let's see where it is from, epiluc, but for that we are going to rely on the following cops,

24
00:03:45,700 --> 00:03:55,280
Look, here we have the next cop, look, it doesn't have the screen printing, this model of the panel,

25
00:03:55,480 --> 00:04:05,460
hv, 550 cub, n4, this is the model of my panel, okay, I'll go, ok, and fine, here I also repeat,

26
00:04:05,460 --> 00:04:13,340
all of these in parallel, here I have the signals, ok, in such luck or in such case, I can raise

27
00:04:13,340 --> 00:04:25,500
my diagram, accommodating me from all the cops, look, here we go to another one, and look, here it throws us

28
00:04:25,500 --> 00:04:37,000
other data that we do not have, look, see cc of 1.8, look, go with, here it is look, go with,

29
00:04:37,720 --> 00:04:50,520
here it comes in, let's see, for continuity it gives us there, go with, let's see, from here, to this point,

30
00:04:52,240 --> 00:05:00,140
There it is, look, and you see, here he tells me, this cop has 100 11 tracks,

31
00:05:00,860 --> 00:05:12,560
This cop covers 100 11 tracks, this being track 1, and ending at 100 11, which is driver 4,

32
00:05:13,300 --> 00:05:21,300
we have in driver 4, we have the ve with, which is this track, ok, then in such luck, well

33
00:05:21,300 --> 00:05:30,120
and I can now identify with this data, here I am also going to have another look with, look, here I have

34
00:05:30,120 --> 00:05:38,520
a capacitor, let's see, here it comes to a capacitor, here it is, look, the c717,

35
00:05:39,280 --> 00:05:53,930
If we go to driver 3, it says c718, and if we go to driver, here it is again, c720, here we are going to have, go with,

36
00:05:53,930 --> 00:05:58,710
Let's agree that all these are lands, look, here it marks lands, here is the ve con,

37
00:05:59,130 --> 00:06:05,690
So here I can raise my diagram, I already took a photo of this, this is what they should do

38
00:06:05,690 --> 00:06:11,330
You are the example, this is an example, I am going to show you, I am going to minimize this,

39
00:06:15,310 --> 00:06:29,570
allow me, allow me, allow me, I'm going to aminize, let's meet at the desk, here I am, and look,

40
00:06:30,710 --> 00:06:40,350
I previously took a photo, here is my photo, which I previously took for this television,

41
00:06:41,550 --> 00:06:54,470
Here the cop is arranged, and I am basing it, I am going to slow it down a little, I am basing it on the cop x2,

42
00:06:54,590 --> 00:07:10,330
here it is look, x2, here it is, ok, then here I can place my gamma, here they are, not that

43
00:07:10,330 --> 00:07:22,150
If I need the ve with and the ve with is here c720, then here would be to point this one, this ve with what

44
00:07:22,150 --> 00:07:29,030
There is a go with, so obviously you can add it with whatever you like, that is an option,

45
00:07:30,930 --> 00:07:39,830
No, I'm not going to give too much away, here I can put a circle on this capacitor and I can put a color on it,

46
00:07:39,830 --> 00:07:49,250
We are going to say that it is green, ok we are going to put it green and here I say, ok I am going to copy this color because I am going to

47
00:07:49,250 --> 00:07:58,270
contribute or something else, copy, and I selected it, then what I'm going to do, if I make my diagram I'm going to make here a

48
00:07:58,270 --> 00:08:09,300
I remember, a memory and I'm going to paint it the same color that I made this one and then here I already

49
00:08:09,300 --> 00:08:27,970
I would place go with, go here, I'm going to use it, I'm going to put it in black, go with, I repeat, you can do it

50
00:08:27,970 --> 00:08:34,030
do with your tools that you have or your pijj editor, doing it with Photoshop, you can

51
00:08:34,030 --> 00:08:45,350
do with camba with what you want, there is my, I already have with this green color, I already have my indicated

52
00:08:45,350 --> 00:08:56,870
go with, now I can point out these range, you could close them in a box and put range here, but

53
00:08:56,870 --> 00:09:08,550
I already know that the je refers to range, ok I already have it up to here I already have my strategic point located to

54
00:09:08,550 --> 00:09:18,970
be able to know that this is becon, if I wanted to know if there is another becon here I would have to do it by

55
00:09:18,970 --> 00:09:30,090
continuity of the c720 we return again here to me, to the monkey here we are again, there we are

56
00:09:30,090 --> 00:09:48,380
looking at our range, there is my, like here the camera, there is c720, but I want to know for continuity if it exists in this

57
00:09:48,380 --> 00:10:05,360
mico, another range, and how it is done exactly the same for continuity my, here in this one, it seems my,

58
00:10:05,360 --> 00:10:16,100
This mehe I look at the camera, there it is, and my, we are going to do it again, it seems to me that it is

59
00:10:16,100 --> 00:10:34,530
track that there is a trujol, on this track I am going to repair a little, to see if it is that one, or look there it is, let's check,

60
00:10:37,690 --> 00:10:45,910
obviously this is not a land, if it is this track, exactly this track, here I am not not doing this,

61
00:10:46,830 --> 00:10:57,450
here is another becon, another becon entry and I'm doing it through continuity, there it is, and that's how I can do it

62
00:10:57,450 --> 00:11:14,530
keep looking for some other clue that tells me what becon is, obviously this one, I don't have another one, I have two that would be this last one,

63
00:11:16,530 --> 00:11:27,050
here, what would it be, if I go, to my diagram, well to me, to my image that I take, well it would be this one that is here,

64
00:11:28,310 --> 00:11:37,510
It's here, so what I would have to do is copy this one, that is, ass, I'm going to duplicate it,

65
00:11:37,810 --> 00:11:44,850
repeat and learn to use these tools, it's easy, I'm giving the idea, and look here,

66
00:11:45,910 --> 00:11:55,370
I'm going to put it on top of the track, that line that comes there is also becon, that's why there is a selection,

67
00:11:55,490 --> 00:12:06,010
So I already have range and I have becon, let's remember that also in the other cop, we had 1.8, let's go again,

68
00:12:06,010 --> 00:12:15,570
where it was indicated, look there is becon, the beces is already there, let's see, it seems to be in that capacitor,

69
00:12:17,030 --> 00:12:30,290
here is becon, then sorry about the 1.8, let's see if it is indeed me, and here is another me, similar, let's see if it is the same,

70
00:12:36,070 --> 00:12:53,410
To me, this one, another beces, let's see if here, this one next door is also beces, no, no, but this one is,

71
00:12:55,630 --> 00:13:14,960
Not this one, this one, this is my beces, ok, there it is, we have 2 beces in the pane, so if we are going to

72
00:13:14,960 --> 00:13:32,190
coc, they are not marked, let's show it again here it is, I'll keep this, it guided me exactly the same as it said at the time,

73
00:13:33,590 --> 00:13:46,730
There it is, that means I'm going to put the tip of a multimeter in the beces, 1.8 and I'm going to go to the capacitor which apparently is this one, and look, let's see there it is,

74
00:13:47,890 --> 00:14:00,930
and the other would be this, if I'm not mistaken, there it is, I have my 1.8 reference, remember that they enter at the same point, it doesn't change,

75
00:14:01,370 --> 00:14:13,650
then I go back to my desktop and now I can select here, I can copy, well I know,

76
00:14:13,650 --> 00:14:25,750
How is it going to be now, I compare, I'm going to duplicate this one more, but I'm going to change it and color, here I'm going to duplicate it,

77
00:14:26,410 --> 00:14:41,050
ok I'm going to position my circle, where the 1.8 goes, which is, here,

78
00:14:44,430 --> 00:14:55,190
It seems to me, now let's see again, it seems to me that it is here, that I have it here, let's go back, because now,

79
00:14:56,510 --> 00:15:12,410
Let's see again, so as not to make mistakes, look, it is the capacitor, c22, c722 and the capacitor c726,

80
00:15:14,210 --> 00:15:26,570
c722 and c726, ok, come on, so here is c726, I was doing the right thing, and the 22 which is this,

81
00:15:26,690 --> 00:15:34,790
So I'm going to, before arranging the other one, I'm going to change the color to this one, we're going to put a lilac color on it,

82
00:15:34,790 --> 00:15:46,950
ok I'm going to copy the color, so I can make the box, here, ok, I'm going to copy this same one, I'm going to duplicate another one of these,

83
00:15:47,150 --> 00:16:00,930
to put it where the other goes, me, from here, here, there it is, so now yes, something, the same thing I did here,

84
00:16:02,390 --> 00:16:16,530
I make a box, I'm going to put the color it is, that's why I copied it, so I can put the same color, the color tone,

85
00:16:16,530 --> 00:16:40,010
and there it is, I say, ok, it's ready, and now this would be my bcc, ok, bcc1.8 bols, and look,

86
00:16:40,010 --> 00:17:05,410
I'm already putting up my diagram, or my schematic, I already have gamma, I already have bcc1.8, I'm missing the hbg, the hbg and I'm missing the video signals, ok,

87
00:17:05,410 --> 00:17:12,890
This is where, where things begin to change unlike him, him, the other thing, we're going to see, we're going to get out of here,

88
00:17:14,250 --> 00:17:27,610
Now we are going to put it here, there it is, now we are going to place before the time of it and the hbg, the video signals and in this case,

89
00:17:27,610 --> 00:17:41,270
The entire quadroca system uses only one signal pair per co, which means that my video signal,

90
00:17:41,930 --> 00:17:52,090
are these two texts, for a quadroca video signal, here they normally exist between 400,

91
00:17:52,090 --> 00:18:06,230
600, 600 milli volts, here, ok, this is my video signal, for this co, for the co, x2, ok, for the x2,

92
00:18:07,050 --> 00:18:17,730
For the x1 there is also that same signal pair and look, here it is, here it is the 1.8, I realize,

93
00:18:17,730 --> 00:18:32,730
It has this same figure as in the other case, look, here is my, it has this same figure,

94
00:18:33,130 --> 00:18:43,890
the 1.8 and here it is 1.8, so here I already have my signal my my baby, well, then now yes,

95
00:18:43,890 --> 00:18:57,970
I go back to my co, my ni miso and here they are miso, these two, here I can call them the same,

96
00:18:59,010 --> 00:19:08,750
I can copy, I'm going to copy here, this color, well that's the point, duplicate, let's say yes,

97
00:19:08,750 --> 00:19:23,390
I already duplicated it, now I'm going to position it here and I'm going to copy another one, duplicate it again, and I'm going to say, ok, there it is,

98
00:19:24,230 --> 00:19:33,070
and I'm going to position it here, but I'm going to change the color, because if not it doesn't make sense, or it's going to turn yellow,

99
00:19:33,070 --> 00:19:42,050
that yellow is going to copy here, copy, I repeat this so that you can see how it rises and it depends on you,

100
00:19:42,130 --> 00:19:51,030
If you do it or not, that will depend on you and how you do it, and I'll hit it, then I already have it there, forgive me here,

101
00:19:51,030 --> 00:20:02,470
where I've moved, I hit, hit, and I say ok, now I'm going to open another memory,

102
00:20:02,570 --> 00:20:19,830
rectangle and I'm going to put it in the color it has, paste it, and here I'm going to place it, here,

103
00:20:21,630 --> 00:20:31,030
here I would put mini, he, not true, well the mini, I'm going to despair, it's signs,

104
00:20:31,170 --> 00:20:47,610
see the same, mini, v, v, 1, this is the first pair, or called lane, look here it devoured me, I didn't hit it, it doesn't matter,

105
00:20:47,610 --> 00:21:02,610
That's why it's not a problem, here I paste the color and that's it, ok, there it is, then I have it up,

106
00:21:03,490 --> 00:21:12,110
my secap diagram, remember that this is going to be useful for everyone, this model, now we are going to point out the model, it is also important,

107
00:21:12,110 --> 00:21:20,270
There it is, I have the range signals, there they are, I have them props, I can give a color,

108
00:21:20,430 --> 00:21:28,350
I can sign them a color, I can put a color here, for example, here I can select them, I can do this,

109
00:21:28,350 --> 00:21:52,640
I know very well, here yes, yes, I repeat and it is as you want it, this driving, here like this, this is already

110
00:21:52,640 --> 00:22:02,720
Agusto, here I can, I moved it there sorry, I was careful with that, there it is, and here I can select it and

111
00:22:03,400 --> 00:22:13,840
here is bar, there is bar, I can give it a color, let's say red, the one above also a red,

112
00:22:14,740 --> 00:22:21,720
I am not copying it here, but so that you understand more or less, I can close it, that is, I can enclose this,

113
00:22:23,420 --> 00:22:32,720
duplicate, I do it, ok, in the step over here, what would these be, this, I say duplicate,

114
00:22:34,120 --> 00:22:45,900
I say it ok, and there I have it, now here I can do exactly the same, I repeat it is an axis in

115
00:22:45,900 --> 00:22:56,120
You can do it, the way you like, there, or put it red, I'm going to copy another one,

116
00:22:57,020 --> 00:23:13,580
There it is, and now I can write here, gamma gamma xane, or gamma channels, there it is,

117
00:23:15,200 --> 00:23:22,740
So if I go back to the drawing, well, I already have it, then well, to the photo, I already have vecon,

118
00:23:23,000 --> 00:23:36,040
I already have times one point eight, I already have vebicuan, I already have gamma, I already have it ready, ok, then be careful,

119
00:23:36,040 --> 00:23:46,400
For an HD transmission system, I repeat there are only two pairs or one vebicuan signal lane,

120
00:23:46,840 --> 00:23:56,420
because each cop, a system, a 4K system uses 12 pairs, I'll tell you quickly,

121
00:23:57,020 --> 00:24:07,540
here I have the main, I have a main, let's go to, I'm going here to the, so that it is understood,

122
00:24:10,020 --> 00:24:24,500
here I have a 4K main and here I have the signals, look, here I am going to have signals and here I am going to have signals signals

123
00:24:24,500 --> 00:24:30,800
obviously from video, as if from counting because they come in pairs, look, we are going to count,

124
00:24:35,160 --> 00:24:41,280
Here we are going to locate them quickly, these are vertical control signals, all of these and then here is one

125
00:24:41,280 --> 00:24:52,480
that it is a single track that there is another, that they are the single track or another, and here they are parmira, here they are lane on vebicuan or 4K screens they are called lanes,

126
00:24:52,480 --> 00:25:11,900
here we have one, two, three, four, five, six, we have six vebicuan signal lanes for one side of the panel,

127
00:25:12,480 --> 00:25:19,620
we are doing here, now let's go to the other connector, we would also have to have six other pairs because because

128
00:25:19,620 --> 00:25:27,880
we have two secaps, so here we go here they are all signs, there are no signs, here is the first one,

129
00:25:28,940 --> 00:25:48,540
two, three, four, five and six, with this we have six lanes here, six lanes here for a total of two secariles for a total of two secaps,

130
00:25:48,540 --> 00:26:01,840
That's why one lane or a pair goes to each cop, if I canceled that signal, that lane here would give me a black stripe,

131
00:26:02,180 --> 00:26:07,560
or the video would be bad, I would get a stripe, a column that's why it's called in Colombian, here I would get a column,

132
00:26:07,560 --> 00:26:14,620
where there will be no video, if I check here, I must have a voltage repeat for your mother among four hundred,

133
00:26:14,680 --> 00:26:24,320
at six hundred thousand and volts, ok, now we add the voltage so you can see, gamma, I must have a ladder voltage,

134
00:26:24,760 --> 00:26:32,720
The maximum is going to be what there should be, let's say that if we have 17 volts, the maximum in range,

135
00:26:32,720 --> 00:26:39,920
whether range 1 or range 14, range 15, range 16, as for example here we are seeing it, here it tells us,

136
00:26:41,580 --> 00:26:52,000
We have range 1, 3, 5, 7 and 9, what is 1, here we could have the highest level and in range 18,

137
00:26:52,600 --> 00:26:59,020
Look, here we have it, it is the highest, range 18, we would have to have the lowest voltage,

138
00:26:59,720 --> 00:27:08,320
Now we are going to review it, and the other voltages would be scaled, the ve with would come out of the middle,

139
00:27:08,580 --> 00:27:24,520
If there are 18, we are going to count there are 3, 5, 6, 7, 8, 9, there are 18, between 9 and 10, between 8 and 9 we would have the range voltage,

140
00:27:24,520 --> 00:27:30,000
Right now we are going to take it out so you can see it, as it is, but we are still building the diagram,

141
00:27:30,200 --> 00:27:35,960
What I want is for you to see how it works, now we no longer know which one is bd here,

142
00:27:36,560 --> 00:27:43,860
here we no longer know what our bd would be, nothing happens, for that we can connect the television,

143
00:27:44,300 --> 00:27:54,180
We are going to connect it and we are going to verify the range voltage, where, in the capacitors that we have not verified,

144
00:27:54,180 --> 00:28:03,640
ok, here it is, I'm going to, what is when we have been verified? Well, I haven't verified here,

145
00:28:04,000 --> 00:28:14,640
be a I checked it and I have 7.6, here in this, I have 7.6, that could be the a bdd, me,

146
00:28:19,550 --> 00:28:35,110
here, allow, 7.6, on that capacitor, okay, and then I have the one here, that capacitor also

147
00:28:35,110 --> 00:28:44,550
I had verified it and we have 10 and 7, here we have 17, here they are to bd, let's see where else

148
00:28:44,550 --> 00:28:57,850
we can have in this one, we have 1.1, in this one, we have 1.1 and in this one we are going to have 1.8, of course,

149
00:28:57,850 --> 00:29:19,590
there it is, 1.79, ok, so my a bd tells me it is, here is this capacitor that says c, c, c, c and c, c, c, c, c, t, i i, c, i, c, c, c, b, c, c, b,

150
00:29:19,590 --> 00:29:35,670
ok I'm going to disconnect and now I'm going to avoid through continuity what we have been doing if apart from that we have another pin where the bdd enters

151
00:29:35,670 --> 00:29:49,870
via we have and years indicate the voltage reading that I focus on that this is a bdd now

152
00:29:50,470 --> 00:29:56,250
nor would we be able to locate if we have another bdd

153
00:30:00,070 --> 00:30:08,730
look there it is, here we have a trojor here there it is, bdd

154
00:30:09,770 --> 00:30:21,230
ok, c7, 35, 30, and c7 seems to me to be where we have bdd and then here we have in those a 2 tracks that are a bdd

155
00:30:21,230 --> 00:30:24,030
We will continue looking if we had more bdd

156
00:30:24,570 --> 00:30:27,430
here we have another one bdd

157
00:30:27,990 --> 00:30:33,650
where range ends 2 more tracks or 3 and we have another one to bdd

158
00:30:34,430 --> 00:30:35,110
we arrived

159
00:30:38,780 --> 00:30:42,900
1, another to bdd here

160
00:30:44,060 --> 00:30:48,200
the same where the range ones are going to start, ok

161
00:30:48,200 --> 00:30:52,860
so if we go to our image

162
00:30:55,380 --> 00:31:01,360
I already located this point, this point

163
00:31:01,360 --> 00:31:09,800
This point is a bdd and we are going to do this point, I am going to do it so that you can see

164
00:31:09,800 --> 00:31:16,400
I hope it becomes clear to you, and maybe you are going to ask me and if it is not marked in the majority it will be marked

165
00:31:16,400 --> 00:31:22,780
but not all the copies, as in this case, are marked, part in one part in another part is marked.

166
00:31:22,780 --> 00:31:27,620
You have to do this exercise and you will realize that it is not complex at all.

167
00:31:27,620 --> 00:31:36,380
Obviously it's going to take a while but it's not like it's not going to do the truth.

168
00:31:36,380 --> 00:31:43,840
duplicate and this is done once later it is not even done again here it is one

169
00:31:44,620 --> 00:31:49,900
Now I'm going to change the color, duplicate, I'm going to say yes.

170
00:31:49,900 --> 00:31:53,520
to make the circles of one size here I have another

171
00:31:56,760 --> 00:32:02,780
We are going to make another duplicate, I say yes

172
00:32:02,780 --> 00:32:11,160
here I have another one, so I have 4 a bdds and I duplicate

173
00:32:11,160 --> 00:32:12,900
and I say ok

174
00:32:14,700 --> 00:32:21,900
Now I pass this one over here because this is where my

175
00:32:22,800 --> 00:32:27,860
format, now I'm going to put it, we're going to put a blue color, that's a bummer

176
00:32:27,860 --> 00:32:33,020
I'm going to copy it so I can copy it and give the same tone to everyone else, ok

177
00:32:33,020 --> 00:32:37,700
Now I'm going here and I'm going to give it the same tone

178
00:32:43,040 --> 00:32:47,560
now right here tone

179
00:32:51,320 --> 00:33:01,400
ok and I'll go down here which would be this and I'll give it the same blue

180
00:33:03,440 --> 00:33:07,200
and that's it, there I have my

181
00:33:07,200 --> 00:33:10,380
there sorry it moved me

182
00:33:15,970 --> 00:33:23,110
ready, I already have my 4 bdds points and these minutes will be repeated in the others

183
00:33:23,110 --> 00:33:27,170
and now all I need is to place it here, I box myself a rectangle

184
00:33:27,850 --> 00:33:30,070
give the color

185
00:33:30,070 --> 00:33:34,470
I hit him like this

186
00:33:36,810 --> 00:33:43,490
and now all I need to do is put bdds here

187
00:33:44,010 --> 00:33:51,210
bdds ready, now if you want to put what voltage you have

188
00:33:51,210 --> 00:33:54,250
Well, that's your option now.

189
00:33:55,850 --> 00:33:57,970
so I already have practically

190
00:33:59,330 --> 00:34:04,050
and I'm practically there because I already have

191
00:34:04,050 --> 00:34:06,750
my diagram of my of my cop

192
00:34:06,750 --> 00:34:09,470
I already have practically all of them

193
00:34:09,470 --> 00:34:12,450
boltings that give some clues

194
00:34:12,450 --> 00:34:14,970
like for example this one here

195
00:34:15,710 --> 00:34:17,970
this one is here

196
00:34:18,670 --> 00:34:22,290
this one that is here in this resistance

197
00:34:22,290 --> 00:34:24,970
and this one is here

198
00:34:24,970 --> 00:34:28,350
are the ones left to be able to say

199
00:34:28,950 --> 00:34:33,050
ok I just need to get that schematic up

200
00:34:33,050 --> 00:34:36,130
or what voltages go through there

201
00:34:36,690 --> 00:34:37,750
in those signs

202
00:34:37,750 --> 00:34:41,830
If I didn't have the name of what happens out there

203
00:34:41,830 --> 00:34:44,170
well it's easy nothing more

204
00:34:44,170 --> 00:34:46,770
measure the voltage and write it down

205
00:34:46,770 --> 00:34:48,830
assign a color to each

206
00:34:48,830 --> 00:34:53,070
line and indicate the voltage you have

207
00:34:53,070 --> 00:34:56,710
there and that easy and simple

208
00:34:56,710 --> 00:34:58,350
would this be

209
00:34:58,350 --> 00:35:00,770
some of the testimonies here

210
00:35:00,770 --> 00:35:02,470
any of the ones you have so far

211
00:35:02,470 --> 00:35:04,870
I think they are not difficult at all

212
00:35:04,870 --> 00:35:07,530
observation is obviously required

213
00:35:07,530 --> 00:35:09,030
is required

214
00:35:09,030 --> 00:35:10,630
because it requires expertise

215
00:35:10,630 --> 00:35:12,670
but nothing from another world

216
00:35:12,670 --> 00:35:14,510
there it is

217
00:35:14,510 --> 00:35:16,790
So here I have some signs

218
00:35:16,790 --> 00:35:20,290
I'm going to connect my television

219
00:35:20,290 --> 00:35:23,270
here I have signs that

220
00:35:23,270 --> 00:35:24,490
they don't have

221
00:35:24,490 --> 00:35:27,090
they don't have this

222
00:35:27,090 --> 00:35:29,570
I don't know what works, buy

223
00:35:29,570 --> 00:35:31,990
If I don't know what works, buy it.

224
00:35:31,990 --> 00:35:34,750
Well, I repeat, you can expose them

225
00:35:34,750 --> 00:35:37,050
to sign a

226
00:35:37,050 --> 00:35:38,950
Well, this one

227
00:35:38,950 --> 00:35:40,750
voltage you have

228
00:35:40,750 --> 00:35:43,410
let's check

229
00:35:44,750 --> 00:35:46,450
here I am already a conqueror

230
00:35:46,450 --> 00:35:50,630
and here I have a clue

231
00:35:50,630 --> 00:35:53,770
and has 8.4

232
00:35:53,770 --> 00:35:57,530
that track where I am has 8.4

233
00:35:57,530 --> 00:35:59,410
that could be BDD

234
00:36:00,170 --> 00:36:02,370
because normally to BDD

235
00:36:02,370 --> 00:36:03,330
it's half

236
00:36:03,330 --> 00:36:04,750
but in hbd

237
00:36:04,750 --> 00:36:06,510
because it is half of BDD

238
00:36:06,510 --> 00:36:07,770
here it is

239
00:36:07,770 --> 00:36:08,530
the one point

240
00:36:08,530 --> 00:36:12,550
that has the TC 7.22

241
00:36:12,550 --> 00:36:15,470
half are almost 9

242
00:36:15,470 --> 00:36:16,170
ok

243
00:36:16,170 --> 00:36:18,170
they are leo a TC 7 they are 8.5

244
00:36:20,490 --> 00:36:21,930
so here

245
00:36:21,930 --> 00:36:24,130
in this one I have

246
00:36:26,850 --> 00:36:28,290
8.07

247
00:36:28,290 --> 00:36:30,730
This would indicate that it is very likely

248
00:36:30,730 --> 00:36:31,870
that has been

249
00:36:31,870 --> 00:36:33,970
m h bDD

250
00:36:33,970 --> 00:36:34,170
ok

251
00:36:34,170 --> 00:36:42,430
It is one of the clues that, well, I still have not located what function it fulfills than another.

252
00:36:42,430 --> 00:36:56,790
this is already this is already here 8.20 something similar to this is a has 8.7.8.05

253
00:36:56,790 --> 00:37:03,730
8.05 ok now let's check if there is any continuity between this and this that another track does not

254
00:37:03,730 --> 00:37:14,290
It is discovered that this does I have 1.7. Let's see what we've been doing let's see

255
00:37:14,290 --> 00:37:30,090
If in some other cop those signs are specified here, nothing will happen to each other here, then

256
00:37:30,090 --> 00:37:43,790
Let's go to the other one here, nothing, let's go to the other one just like that and look here, the

257
00:37:43,790 --> 00:38:01,690
tall that says what the look is this look is a voltage of let's check 1.8

258
00:38:01,690 --> 00:38:21,110
They remembered the piluca so look here it is but also let me know that it is now yes

259
00:38:21,110 --> 00:38:31,650
the one that looks 1.8 there it is so I already have the look now we are in the test so you can see

260
00:38:31,650 --> 00:38:41,810
because this is the look is the look is going to let's see where it reaches this one we're going to verify if it reaches

261
00:38:41,810 --> 00:38:52,370
go you can finally connect by continuity I repeat the cops come like this as not all of them are marked but each

262
00:38:52,370 --> 00:39:04,230
It doesn't give you an indication. Let's go here, let's see if this one is the same as this one. Don't look, this one is 1.8 and it's not the same.

263
00:39:04,780 --> 00:39:14,160
here is my ok this is the look look out it is called here is the look this is the here says the look 6

264
00:39:14,550 --> 00:39:27,520
here ok but from here you don't have any e let's get some of this and no e ok then let's go

265
00:39:27,520 --> 00:39:38,590
to where to our diagram to our that we are raising our diagram ok where is that

266
00:39:39,220 --> 00:39:56,180
that look then what we are saying is called look ok look here we have it here it is let's analyze it in

267
00:39:56,180 --> 00:40:06,600
Where it is, where it arrives is that I bring my slow document because the truth is already visible and it doesn't help

268
00:40:09,700 --> 00:40:19,760
a lot and the sight is already tired with its that we support the tools that exist for these cases

269
00:40:36,260 --> 00:40:47,900
ok then let's do it it's close to almost science so obviously we have a clue which is the

270
00:40:47,900 --> 00:40:58,020
The truth is that it is the vecom and next to it, the first clue is mainly the vecom and then we

271
00:40:58,020 --> 00:41:07,020
follows another clue and does not follow a third, look at what is here, they are seeing that clue that

272
00:41:07,020 --> 00:41:25,160
what you are seeing here is a point 8 here ok what is the look let's check which is the capacitor that changes the

273
00:41:25,160 --> 00:41:40,820
capacitor well it has its version ok but let's go so that you can learn it ok let's do it

274
00:41:40,820 --> 00:41:52,780
Look, I'm going to come out, here I am, I'm going to come out, here I am, and look what's going to happen, I'm going to measure that.

275
00:41:52,780 --> 00:42:08,340
epiluc no no what do we have here or that look here mark it as look here ok it's 1.8 let's go I'm going to disconnect the pane

276
00:42:08,340 --> 00:42:14,300
We already see that we have 1.8 with the panel connected, then disconnect and I am going to connect the television

277
00:42:15,100 --> 00:42:26,340
and we are going to check if we still have ok voltage at that point and we are going to see my look

278
00:42:28,860 --> 00:42:49,620
I separate and there it is, what happened I shoot you, I don't have 6.0, it shoots and there I am in the look

279
00:42:50,100 --> 00:43:01,160
here I must stop 1.8 if that voltage is used or the

280
00:43:01,160 --> 00:43:07,460
voltage that can be lost, I am now going to disconnect the flex again, which is ours, so that it can be

281
00:43:07,460 --> 00:43:15,760
know and know how to verify because many cases happen that televisions have this problem, we are going to verify

282
00:43:15,760 --> 00:43:28,180
look again there it is obviously the television has video obviously the television has video because yes

283
00:43:28,180 --> 00:43:38,060
otherwise it wouldn't be working ok so it's clear to you that it should look like

284
00:43:39,140 --> 00:43:50,540
1.8 working correctly ok correctly now in look it does not enter all cops

285
00:43:51,560 --> 00:43:58,280
okay, be careful with that here you are seeing it here you are seeing it it is going to be

286
00:43:58,280 --> 00:44:07,110
calomas that I can, I'll circle it as much as possible and I'll turn off allus

287
00:44:08,670 --> 00:44:25,780
Let's see if you can distinguish, look, there's the look if I'm putting it as low as possible.

288
00:44:25,780 --> 00:44:35,200
What can I do with the camera so that it can be seen there, look, we could get down to the task of telling

289
00:44:35,200 --> 00:44:42,620
Here we even have the siton, we could take on the task of counting back until we see what pin

290
00:44:42,620 --> 00:44:56,960
It's in look I repeat not everyone uses it ok not all coplo uses it so that there is no conflict I look let's go to another to another copo

291
00:44:56,960 --> 00:45:08,920
in here it is and here you don't use it you don't have it my ok so I recommend you tell that if all the

292
00:45:08,920 --> 00:45:15,780
they will have panels on the gilo because that is what will tell you if it is working or not, it will block it

293
00:45:16,320 --> 00:45:26,900
Now they have a new way to verify and it is look look 6, it is precisely for that purpose

294
00:45:26,960 --> 00:45:33,460
so that we have video, what happens if we have altered the botting, the video can enter and that can go

295
00:45:34,020 --> 00:45:42,140
What other failure can cause you without video, so it is important to take it into account.

296
00:45:43,740 --> 00:45:55,000
ok so there is the 1.8 panel, it is what we must have so that 1.8 can work

297
00:45:55,000 --> 00:46:03,200
Now if we went to the last flake which is here, well, here it is easy because in this one it comes, well

298
00:46:03,200 --> 00:46:11,360
barcada truth here are the clues the resistances the text points of the signal the mir bcc and bin o de of the signal

299
00:46:11,360 --> 00:46:22,360
clock everything is marked here so just apply the continuity to these points to these trojolme

300
00:46:22,360 --> 00:46:41,560
here allow here everyone this everyone this is just going to do that so you can have

301
00:46:41,560 --> 00:46:53,540
obviously that one because those data I repeat all the signals are going to go through one side so if you want to start

302
00:46:53,540 --> 00:47:01,620
escape or it is the or to take off I recommend that you always do it here at the cop level it will always be better because

303
00:47:02,140 --> 00:47:08,320
because let's remember that without anything else we cut or remove here it would make it easier to remove the resistances

304
00:47:08,320 --> 00:47:16,520
point if the esquita or chino we lift it but many times this line is communicated between layers of the pcb

305
00:47:17,300 --> 00:47:22,660
then it can cause you, it may not remove the error as such, then

306
00:47:22,660 --> 00:47:31,980
The best thing will always be to isolate the cop from the tracks ok now you can also remove the resistance

307
00:47:31,980 --> 00:47:38,440
If you see that there is no longer continuity with the resistances, it can also work for you, but from experience I

308
00:47:38,440 --> 00:47:46,260
I always recommend canceling channels or signals at the cop level, here you have to make an incision

309
00:47:46,260 --> 00:47:55,000
to be able to restore and so you don't have any problems, I always recommend that and if you do it

310
00:47:55,000 --> 00:48:04,420
What you want to do or not, it will depend on you, but there is what you have to do, you already saw how it can be done.

311
00:48:04,420 --> 00:48:10,760
Obviously they have to do this for the brand, no, the brand does not give you the brand, it will always be the same.

312
00:48:10,760 --> 00:48:17,480
It's going to give you the same concept but I recommend that you do it. Is there any doubt that you have?

313
00:48:17,480 --> 00:48:27,800
Colleagues, any questions you have, have any questions, let's see so we can give them a solution.

314
00:48:30,700 --> 00:48:38,320
If you have any questions, please let me know so we can give you a solution to this, what to do if you want.

315
00:48:38,320 --> 00:48:44,680
learn well the recovery of panels we have next week maybe a course of

316
00:48:44,680 --> 00:48:51,960
three days then we are going to talk about the failures as such and the solutions if you want to sign up for that class

317
00:48:51,960 --> 00:48:57,780
Well, it is also available for those who are not there and who can learn more about it, remember that

318
00:48:58,560 --> 00:49:05,160
Panel recovery is not always going to be easy or simple, but it is always yes.

319
00:49:05,160 --> 00:49:12,720
It will be very profitable when you recover a television due to these types of conditions, so well

320
00:49:12,720 --> 00:49:19,220
If you have any questions, please watch, remember that I will share the videos with you or even a little later.

321
00:49:19,220 --> 00:49:24,980
I'm sharing them so you can download them and you don't even have seven days to download them, so well

322
00:49:24,980 --> 00:49:36,500
there it is friends any questions anything let me know please let's see here we have questions

323
00:49:39,870 --> 00:49:46,930
and if we make the bridge and the voltage is blocked it means that this cop is damaged yes normally yes all

324
00:49:46,930 --> 00:49:53,870
is the bridge to the escrow is 1.8 you are going to release the video but if you drop that voltage it means that you have

325
00:49:53,870 --> 00:50:01,150
Two things can happen: you drop it because a cop is damaged or the other is because it is open.

326
00:50:01,150 --> 00:50:07,510
and that voltage of 1.8 does not arrive because it is open between cops because because that works between cops

327
00:50:07,510 --> 00:50:15,230
ok it has an entrance and an exit that's why not all of them have piluc 6 or are not marked as luc 6

328
00:50:15,230 --> 00:50:22,290
So I always recommend checking the look on the panel if it is high you can see if it is

329
00:50:22,290 --> 00:50:29,650
open that voltage can be injected or the other that that voltage is rising because it has

330
00:50:29,650 --> 00:50:36,950
a short if they rise normally you will not have a short you will have an absence of voltage but if it is in

331
00:50:36,950 --> 00:50:44,770
zero can be open or it can be shorted so I recommend measuring it through continuity to ground to

332
00:50:44,770 --> 00:50:51,230
You will hardly have any type of problem when it comes to injecting and it will undo something else

333
00:50:51,230 --> 00:50:57,410
If it can pass those cases then in case I recommend this to verify all that detail ok

334
00:51:01,180 --> 00:51:07,200
And if it can be done, I will repeat the bridges and in case you don't have a short one, you can do it.

335
00:51:07,840 --> 00:51:14,920
So friends, do you have any other questions and if not, then we'll see you next week.

336
00:51:14,920 --> 00:51:21,580
maya we have the tejota cajota course if you want to learn how to start the insamso or not be

337
00:51:21,580 --> 00:51:27,460
restart then maya we have it it is very economical very accessible for everyone with their mornings at six in the afternoon

338
00:51:27,460 --> 00:51:33,260
In case you want it, you can still access it and so you remember later I will share the link of both

339
00:51:33,260 --> 00:51:38,980
Thank you today and thank you very much the group will remain enabled for 15 days or so

340
00:51:38,980 --> 00:51:44,580
In case you have any questions or errors during these weeks, you can contact me.

341
00:51:44,580 --> 00:51:50,860
and I can support you in the resolution of your television if friends, then continue, you do not have any other

342
00:51:50,860 --> 00:51:57,020
ask because I thank all of you or time thank you very much and a big hug from a distance

343
00:51:57,020 --> 00:52:02,700
See you, remember that we are also close to starting the tour here in Mexico of the courses

344
00:52:02,700 --> 00:52:10,260
presence, thank you very much, greetings and we will see each other tomorrow, thank you all, very good

345
00:52:10,260 --> 00:52:15,340
evening good morning good afternoon depending on what you do watching this video thank you very much greetings


